New Palenstine Spray Foam Exterior Walls

New Palenstine The open cell spray foam insulation contains a density of 0.5lb. per cubic foot. The greater the density of the foam the heavier, or stronger it will become. This particular type of polyurethane foam is referred to as “Open Cell” because of the nature of the chemical reaction during the installation process. When the polyurethane foam is being applied the tiny cells of the foam are broken causing air to fill the “open” space inside the material, resulting in a soft or spongy material. The open cell foam carries an R-Value of 5 to 5.5 per inch (R-Value is the measure of thermal resistance, which can be found by identifying the ratio of the temperature difference across a spray foam insulator and the heat flux). 0.5lb. foam products use significantly less material than 2lb. foam products do when completing the same sized job, making them attractive to an individual concerned with conserving the foam material. Due to the fact that open cell foam requires less material, the cost of the project is much cheaper than it would be if you were to apply closed cell foam.

Indiana Spf Insulation

Fireproof Insulation Materials (with Pictures)

Injection Foam Insulation Today, more and more emphasis is being placed on having an energy-efficient home. More people are recognizing that resources are limited and each person needs to make an individual effort to reduce the amount of energy they use. Most residents in the United States live in areas where there are at least two distinct seasons. Winters are often cold and icy, and indoor heating is required for a comfortable living environment. In the summer months, temperatures can get very hot and many homes use air conditioning to keep the environment cool. Using heating or cooling systems takes up a huge amount of energy. You, therefore, want to make sure that the warm or cool air is being retained in your home. If not, a large amount of energy is being wasted. This is where insulation becomes important. How Good Insulation Improves the Energy Efficiency of Your Home Good insulation, especially in your roof, can make a huge difference in the energy efficiency of your home. It keeps the warm air circulating in your home which means that you do not need to use excess energy to keep heat in your home. You will never be able to insulate your home completely; in fact, it would be unhealthy to do so. You can, however, use good insulation to help slow the convection and reduction effect so you are not making your heating system work harder than it should be. This refers to the rate at which heat escapes from your home or the way in which the flow of hot air into your home during the summer months can greatly reduce the effectiveness of your cooling system. What Is the Measure of a Good Insulator? In the building and construction industry, an R-rating is used to rank the effectiveness of an insulating material. The rating looks at how well the insulator repels cold or heat, prevents the flow of air from one area to another, and how well it manages to retain an ambient temperature in a certain environment. When you compare the R-rating of spray foam against other types of insulators, you can start to see why it is considered to be such a great insulator. In terms of an R-ratting, most spray foams rate between 6 and 7.7. Open cell types of spray foam may have a rating as low as 4. Another typical type of insulator that is used in many homes in fiberglass matting. This has an R-rating of only 3.5. When compared to spray foam, you can see how even the lowest level of spray foam insulation is far more effective than fiberglass mats. Added Benefits of Using Spray Foam as an Insulator There can be little doubt that spray foam is a great insulator but is it really the best option for your home? What about the installation and the cost? Spray foam may initially seem to be a more expensive insulation option but you need to look at it from a long-term perspective. It is an incredibly durable substance. When applied properly, it can last for many years. It is also far more resistant to the buildup of moisture and mold, making your home a safer environment to live in. Spray foam will not break apart or wear down over time in the same way fiberglass mats do. Once applied, it will outlast most other forms of insulation. Spray foam can also help to strengthen walls and the structure of your home. It can be applied to small crawlspaces and hard-to-reach cracks. In this way, it can help keep insects and vermin out of your home. To apply spray foam to your home, there are a number of options available. You can choose an option that suits your budget and the time you have available to manage the project. If you are quite handy with DIY projects, you can buy a spray foam kit online. It comes will all the necessary components and safety gear and has easy-to-follow instructions. You can apply it yourself and save yourself some money if you have the time available to take on the project. If you are less confident in your ability to apply the spray foam yourself, then you can use the services of a professional contractor. They can be in and out of your home in a matter of hours or days, depending on the size of a project.

How to Remove Spray Foam Insulation

Insulation Roof Is polyurethane foam, in its sprayed form and as an insulator, actually environmentally friendly? What does 'green' and 'environmentally friendly' mean? All excellent questions, and all of them are not answerable in a word or two. Let's begin with defining the concept of environmentally friendly. According to the International Organization for Standardization (IOS) the term is too vague to be meaningful. The US Environmental Protection Agency (USEPA) agrees, but only to a point. The USEPA created the international Energy Star program in an attempt to provide the manufacturers of goods with a voluntary labeling system for promoting energy efficient products. In the 1990's when the program was started, it was only applied to appliances and electronics. However, today entire homes and home offices are able to gain Energy Star certification. The only criteria is the building must use 15% less energy than a standard home built to the 2004 International Residential Code. How does a home achieve that rating? The things at the top of the list for getting an Energy Star rating are not surprising: insulation, high performance windows, tight construction and ducting, energy efficient cooling and heating systems and Energy Star certified products (appliances, lighting, water heaters). Now, in reference to insulation specifically, its efficiency is measured according to R-value. An R-value is a mathematical calculation which produces the level of thermal resistance a building has. For the average North American home insulated with traditional fiberglass batts, R-value sits at between 3.1 and 4.3 per square inch. Blown in fiberglass insulation has a typical R-value between 2 and 4 per square inch. According to the US Department of Energy, the same home insulated with spray foam polyurethane insulation will have an R-value between 7 and 8 per square inch. Clearly a home insulated with spray foam would be well on its way to achieving an Energy Star rating, even without installing LED lighting and thermal windows. When a building is insulated with polyurethane foam, the costs of heating and cooling will undoubtedly be vastly reduced. Many spray foam manufacturers report that energy costs can be reduced by up to 40%; a claim that is both highly likely and easily attainable. With such a diminished use of energy, there is less demand for petroleum-based products and fossil fuels, resulting in a smaller carbon footprint being left on our planet. We are half way to answering our title question, is spray foam insulation really green? Now we know its immense potential for energy savings, but what about the manufacture of the foam itself? In the case of spray foam, the two substances that come together to produce the foam must remain separate until the time of application. Those two things are polyol (a naturally occurring alcohol) and diisocyanate (a group of organic compounds derived from plant and animal materials). When they are brought together with water, an exothermic reaction takes place producing the polyurethane foam. Although the foam is produced from organic substances, it does not breakdown over time - a good thing for insulation applications, but where does it go when it is no longer needed? When the intended use of the polyurethane foam has been completed, it can be re-purposed and recycled. For example, the Polyurethane Foam Association has pioneered a program in the US in which spray foam insulation and products meant for the landfill are collected and made into carpet foam underlay. The program is so successful that 80% of all carpet underlay used in the US is made from recycled polyurethane foam. The reduction in waste going to landfills is incredible! So, is spray foam insulation really 'green'? Yes, it is. Polyurethane foam is produced in an environmentally friendly way in that it is created from organic compounds using very little energy or water, prevents the excess use of fuel in heating and cooling homes and is entirely recyclable for other uses.

Fireproof Insulation Materials (with Pictures)

Spray Foam Insulation Per Square Foot After long hours of searching you have finally landed in the right place. At last the elusive answers to questions on insulation and spray foam are here awaiting your approval. These aren't the usual newbie FAQ's. These are the 'technical' questions only the really savvy home renovators ask. No more intense bouts of frustration where you suddenly find you're banging your head on the keyboard. The real answers to the advanced questions are here, so say goodbye to impressions of little squares on the forehead. Does spray foam release any Volatile Organic Compounds (VOC)? Polyurethane foam is not considered to emit VOC's. However, during application some spray foams release VOC's through the process of discharge from the canister. After curing there should not be any further emissions. To be sure, check with your foam supplier. Can it be used to insulate underground water pipes? Yes! Work closely with the polyurethane manufacturer to determine the best method of application and the most beneficial kind of foam to use. Regional climate changes and projected temperature extremes will be a part of the decision making process. During application, be sure to prepare the trench properly so that no moisture is allowed on or in the foam until it has cured. Should fibreglass insulation be removed before applying it? Yes! Many contractors opt for leaving blown in insulation in an attic and spraying the foam on top. The problem that arises is ventilation and temperature control. More clearly, the temperature of the attic floor will be different than amidst the fibreglass and the temperature amidst the fibreglass will be different than above the spray foam. The job of the spray foam is to balance temperature and humidity with the environment so condensation is prevented. With an inner layer of fibreglass, where air flows, the conditions would be perfect for moisture formation. Does the surface where it will be applied have to be clean? Yes! Any oil or dust on the application surface will prevent the spray foam from adhering. For the typical attic in a wood frame home, a careful vacuuming job covering every nook and cranny will often be adequate. For applications where the surface is steel (or any other metal) it is even more important for the surface to be free of dust and oil. In some cases where the steel is very new, a coat of primer will be required. Many spray foam manufacturers offer a simple rule: if it can be painted, it can be spray foamed. Does an attic need to be vented if spraying foam on the rafters? That depends. If you are applying the spray foam to the roof deck and gable walls, then you want everything under that surface to be a part of the temperature conditioned space. Vents in an attic with insulation above it would be much like have open windows year round - a total waste of money. If you are applying spray foam to just the attic floor, then the conditioned space is below the attic floor. Vents will be necessary for preventing excess humidity. Is weather a factor when applying it? Water is the most important consideration, either as rain or condensation. If there is any moisture present on the application surface, the spray foam will not adhere. Most of the time the problem will be seen right away, and the installer can stop the job until the surface is dry. In the case of applying spray foam to the exterior of roofs and walls during the construction process, wind will be a major factor as well. Overspray carried by wind can not only affect surrounding surfaces, it can mean a loss of yield. Ambient temperature plays a role as well, albeit in extreme conditions. Exceptionally hot temperatures can cause the foam to not hold shape, cause risk to the installer in enclosed hot places and even risk explosion of the tanks holding the polyurethane. Freezing temperatures, such as in northern Alaska, may cause the applicator to cease working altogether. The substrate temperature is a factor as well. For unique situations such as these, it is best to consult with the manufacturer to see how best to proceed.

 


Indiana