Wynndale The open cell spray foam insulation contains a density of 0.5lb. per cubic foot. The greater the density of the foam the heavier, or stronger it will become. This particular type of polyurethane foam is referred to as “Open Cell” because of the nature of the chemical reaction during the installation process. When the polyurethane foam is being applied the tiny cells of the foam are broken causing air to fill the “open” space inside the material, resulting in a soft or spongy material. The open cell foam carries an R-Value of 5 to 5.5 per inch (R-Value is the measure of thermal resistance, which can be found by identifying the ratio of the temperature difference across a spray foam insulator and the heat flux). 0.5lb. foam products use significantly less material than 2lb. foam products do when completing the same sized job, making them attractive to an individual concerned with conserving the foam material. Due to the fact that open cell foam requires less material, the cost of the project is much cheaper than it would be if you were to apply closed cell foam.
How to Fix Holes in Tree TrunksToday, more and more emphasis is being placed on having an energy-efficient home. More people are recognizing that resources are limited and each person needs to make an individual effort to reduce the amount of energy they use. Most residents in the United States live in areas where there are at least two distinct seasons. Winters are often cold and icy, and indoor heating is required for a comfortable living environment. In the summer months, temperatures can get very hot and many homes use air conditioning to keep the environment cool. Using heating or cooling systems takes up a huge amount of energy. You, therefore, want to make sure that the warm or cool air is being retained in your home. If not, a large amount of energy is being wasted. This is where insulation becomes important. How Good Insulation Improves the Energy Efficiency of Your Home Good insulation, especially in your roof, can make a huge difference in the energy efficiency of your home. It keeps the warm air circulating in your home which means that you do not need to use excess energy to keep heat in your home. You will never be able to insulate your home completely; in fact, it would be unhealthy to do so. You can, however, use good insulation to help slow the convection and reduction effect so you are not making your heating system work harder than it should be. This refers to the rate at which heat escapes from your home or the way in which the flow of hot air into your home during the summer months can greatly reduce the effectiveness of your cooling system. What Is the Measure of a Good Insulator? In the building and construction industry, an R-rating is used to rank the effectiveness of an insulating material. The rating looks at how well the insulator repels cold or heat, prevents the flow of air from one area to another, and how well it manages to retain an ambient temperature in a certain environment. When you compare the R-rating of spray foam against other types of insulators, you can start to see why it is considered to be such a great insulator. In terms of an R-ratting, most spray foams rate between 6 and 7.7. Open cell types of spray foam may have a rating as low as 4. Another typical type of insulator that is used in many homes in fiberglass matting. This has an R-rating of only 3.5. When compared to spray foam, you can see how even the lowest level of spray foam insulation is far more effective than fiberglass mats. Added Benefits of Using Spray Foam as an Insulator There can be little doubt that spray foam is a great insulator but is it really the best option for your home? What about the installation and the cost? Spray foam may initially seem to be a more expensive insulation option but you need to look at it from a long-term perspective. It is an incredibly durable substance. When applied properly, it can last for many years. It is also far more resistant to the buildup of moisture and mold, making your home a safer environment to live in. Spray foam will not break apart or wear down over time in the same way fiberglass mats do. Once applied, it will outlast most other forms of insulation. Spray foam can also help to strengthen walls and the structure of your home. It can be applied to small crawlspaces and hard-to-reach cracks. In this way, it can help keep insects and vermin out of your home. To apply spray foam to your home, there are a number of options available. You can choose an option that suits your budget and the time you have available to manage the project. If you are quite handy with DIY projects, you can buy a spray foam kit online. It comes will all the necessary components and safety gear and has easy-to-follow instructions. You can apply it yourself and save yourself some money if you have the time available to take on the project. If you are less confident in your ability to apply the spray foam yourself, then you can use the services of a professional contractor. They can be in and out of your home in a matter of hours or days, depending on the size of a project.
How to Remove Expanding Foam Residue With a SolventDo you have a sneaking suspicion that the fiberglass insulation in your home or office is falling apart and not doing its job? Do you find bits of pink fluff everywhere? It might be time to ditch your tired old fiberglass insulation and replace it with something that will last. Spray foam is not only more resilient than other kinds of barriers, but it comes with numerous other benefits as well. If you're concerned about the condition of your home or building due to poor insulation, then spray foam can help solve your problems. Spray foam insulation is liquid polyurethane that dries into a tough foam consistency over a surface. Because it's liquid, it can fill in tiny cracks and holes that fiberglass can't protect. The thick, tightly sealed layer it creates is far more energy efficient than any other kind of material. It controls the indoor climate by keeping in more heat and cool air, depending on the weather. This will save you tons of money on electric bills, and be more comfortable for the occupants. Polyurethane insulation also doesn't come with any health risks. Fiberglass is made up of wiry, pink fibers that can make the skin sore and itchy if exposed to it. These fibers come loose and can be inhaled. Breathing in the fibers can cause lesions inside of the mouth and esophagus. Spray foam doesn't have tiny particles that break off and float into the air. It's also harmless to the touch, but is so durable that it does not crumble off anyways. Another benefit of spray polyurethane is that it can make your house or building more hygienic. The thick barrier prevents insects and other pests from sneaking inside. If you've had pest control problems in the past, spray foam insulation can be your new exterminator. Not even moisture stands a chance against its tough exterior. Spray foam keeps water out, which means it also keeps away dangerous mold, which can cost a fortune to repair. If you've been trying everything to get rid of mold, this material is excellent to use in existing homes. Since it can be a messy procedure, and previous insulation will have to be stripped and removed, it is recommended that only professional perform the service. You may be put off by the initial cost of having your home outfitted with a spray foam insulation kit. However, the money and time you will save in the future more than pays for itself. It will even add more value to the home or building, and you won't have to worry about replacing it. The best part about polyurethane is that it is environmentally friendly. If you're trying to make your house or building greener, then spray foam is the way to go. It is made from recyclable and renewable materials, and you'll be saving energy. Its versatility allows it to be sprayed almost anywhere, so you can even insulate the floors and ceilings. Spray foam insulation is a great move to make when you're improving your home or building.
How to Remove Expanding Foam Residue With a SolventSo, you have chosen to kick out the pink stuff and insulate your home using polyurethane foam insulation instead. Congratulations! You're on your way to reaping the benefits of more energy savings, less mold, fewer air leaks, greener materials, and twice the protective capability when compared to traditional fiberglass and cellulose insulation. But you won't see these advantages if you do not apply spray foam insulation properly - and that begins before you start spraying. Before you even think about moving forward, you should be thinking about safety. Protective safety goggles, full-cover clothing, a mask, and work gloves are a must for anyone applying expanding foam insulation. Make absolutely sure that no skin is exposed during application, because the adhesiveness of spray foam is similar to that of permanent glue: it will stick to skin and will not come off. If this occurs, the insulation will remain on your skin until your outer epidermal layer peels off. For the record, the only substances known to remove expanding foam are white spirit-based solvents - and only then if the insulation has not begun to set. Applying polyurethane foam insulation also opens the possibility of the material getting into your lungs, which can cause respiratory problems. In short, get confident in your ability to apply spray foam properly. Once you are ready to proceed, make sure the area where the spray foam is to be applied is between 65 and 80 degrees Fahrenheit. If it is not, either wait for the temperatures to decrease or warm the area using a bullet heater. Also, make sure the application area is clear of debris and dust in order to maximize adhesion. If there are holes or cracks in the walls or ceiling areas where you are spraying, make sure that you apply a sealant to insure a suitable air seal. Once the area to be sprayed is ready, you must turn your attention to the areas that will not be sprayed. Windows, doors, floors, drywall, and other areas must be masked with cloth or plastic sheeting so they won't be affected by over spraying. If there are any objects or structures that cannot be removed before spraying (such as air conditioners, plumbing piping, or heating units), then make sure they are completely covered as well. Again, one gap in your protective sheeting could result in a spot or stain which you may be unable to remove.